Thursday, September 19, 2013

AT10-PA 10W Attenuator

Atlas Sound AT10-PA 10W Attenuator



Priority paging feature by-passes the attenuator dial setting to provide full program level to the loudspeakers. Option is available on all AT attenuators. The SPDT relay is operated with 24 VDC at 10mA.
  • Mount into Most 1-Gang E.O. Boxes.
  • Priority feature compatible with Atlas AA120M amplifiers
  • Priority paging feature by-passes the effect of the attenuator
  • The SPDT relay is operated with 24 VDC at 10mA
  • Binding: Electronics
  • Label: Atlas Sound
  • UPC: 612079179497
  • Product Group: CE

High Gain Premium Grade VHF/UHF Pre-Amplifier

Antennacraft High Gain Premium Grade VHF/UHF Pre-Amplifier



Antennacraft High Gain Premium Grade VHF/UHF Pre-Amplifier.
  • High Gain Output
  • Mast Mounted with Indoor Power Supply
  • Surface-Mount Design
  • Switchable FM Trap
  • One Combined VHF/UHF 75 Ohm Input/Output
  • Binding: Electronics
  • Label: Antennacraft
  • Department: Electronics
  • Model: 10G202
  • Product Group: Home Theater

Wednesday, September 18, 2013

Audiophile Archival Preamp

Rek-O-Kut - Audiophile Archival Preamp



Add one or two turntables to an amplifier that has no phono input or a second turntable to an amplifier with only one phono input. The REK-O-KUT Audiophile Archival Preamp can be used to convert any AUX input to phono use. A Rear panel switch sets up for one turntable for LP and one for 78s, or one turntable for both types of record. If desired, connect the output of the preamp directly to a computer sound card. It is designed for both home as well as broadcast and studio applications. The preamp also applies accurate "record compensation" in the form of the RIAA curve or the most common 78 RPM record curve. Actually, this 78 curve is almost a perfect match for early London/Decca FFRR, and many non-NAB broadcast transcriptions. This equalization curve is adjustable with the front panel Equalization switch. This adjusts the relative levels of bass and treble to match that of modern records or of vintage 78s and early radio broadcast transcriptions.

Features:
  • Accurate LP record or 78 RPM record compensation.
  • 78 RPM EQ also suitable for early London FFRR.
  • Subsonic filter at 10 Hz to prevent ultra low rumble.
  • Includes 39 inch 43 pF/ft interconnect cable.
  • Input matched to most high-quality pickups.
  • Add one or two turntables to a hifi system.

Moving Magnet / Moving Coil Phono Preamp w/Level Control

TCC TC-760LC BLACK Moving Magnet / Moving Coil Phono Preamp w/Level Control



The NAD PP-2 is a great product; for years it has ruled the roost among MM/MC preamps. But our TC-760LC aims to change that. Additional features like an output level control, ability to connect MM and MC turntables simultaneously (selecting between them at the push of a switch), and selectable hi/lo MC input inpedance make the TC-760LC the better value; superior specs make it the better choice as well. A price way below the NAD provides the frosting on this particular cake! Again, you are purchasing the BLACK VERSION. To find the silver version, enter B004RYYC4U in the search bar. Now includes our improved REGULATED AC power supply usable worldwide!
  • available in black or silver finish; this is the BLACK VERSION
  • Total harmonic distortion: 0.005%; RIAA freq response 20hz-20,000hz +/- 0.5dB
  • S/N ratio 82dB MM / 85dB MC; gain MM 38dB / MC 58dB
  • selectable hi range (100 ohm) / lo range (20 ohm) MC input impedance
  • includes US AC adaptor, RCA cable and miniplug adaptor
  • Binding: Electronics
  • Label: TCC
  • Color: Black
  • Model: TC-760LC BLACK
  • Product Group: CE

Monday, September 16, 2013

Audible Ringer

Valcom Audible Ringer



- Valcom CO audible ringer- 90 Vac ring or dry contact closure activation- Connects to analog PBX station port- Provides ringing over paging speakers- Provides 3 seperate zone outputs and volume controls- For use with one-way or talkback page controls- Automatically interrupts page or music during ringingVCV9924C
  • Binding: Electronics
  • Label: Valcom
  • Model: VC-V-9924C
  • Product Group: CE

Elite Pre-Amp

Quad - Elite Pre-Amp



The Elite Pre forms the heart of any system in which it is placed, and a great deal of work has been undertaken to further enhance the excellent levels of musical transparency delivered by its 99 Series predecessor. This has been achieved by careful component selection and re-tuning of the signal path, whilst maintaining the advanced facilities that are unique to Quad's solid-state pre-amps, including Quad Link and Amp Bus connectivity (see below), bypass-switchable filter adjustment for bass and treble, and Quad's unique 'Tilt' control that tailors the entire frequency response to suit the user's preferred balance. The Elite Pre is packed with technical innovation including noiseless solid-state signal switching and digitally addressed analogue volume and balance controls, which track both left and right channels with exceptional accuracy (better than 0.1dB). A highly specified built-in phono stage is provided for analogue turntables, too.
  • Binding: Electronics
  • Label: Quad
  • Model: Elite Pre-Amp
  • Product Group: Receiver or Amplifier

Saturday, September 14, 2013

NEW Page Control - 6 Zone 1Way (Installation Equipment)

NEW Page Control - 6 Zone 1Way (Installation Equipment)



- 6 Zone one-way page control- All call- Background music input, automatically mutes in zone being paged-Page override for special priority announcements- Features are programmable per zone- Built-in tone generator for night ringing, time clock tone, doorbell- Accepts pulse and tone dial- Battery back-up input - Built-in power- UL listed- To interface with analog extension or Centrex line add the VC-V-9970- Access: page port on selected telephone systems, PBX loop start or ground-start trunk port, electronic or 1A2 line key(line card required), or dedicated single line phone set- Input impedance: 600 ohm- Music source impedance: 4 to 600 ohm- Music input level:-10dBm nominal- DC output: -24 Vdc @ 1.5A- Power requirements: 230 Vac/1A or 120 Vac/2A- Weight: 10lbs- Dimensions: 10.9H x 13W x 2.7D- VALCOM POWER UNITS (+30)VCV2006A
  • Binding: Electronics
  • Label: Valcom
  • Model: VC-V-2006A
  • Product Group: PC Accessory

Audio Video Pre-Processor (Black)

Marantz AV7005 Audio Video Pre-Processor (Black)



New stylish front design with dual display, Current feedback Pre amplifier with Marantz HDAM circuit, Ver.1.4 3D ready 6 HDMI inputs(including 1 front input) 2 selectable outputs, USB input for music playback with iPhone/iPod and USB memory, Bluetooth capability with option RX101, Network player function for music/photo streaming, Compatible with Windows7, Support UPnP, Internet Radio(v-Tuner), Online streaming service available: napster, PANDORA, Rhapsody and flickr, iPhone/iPod Touch Apps Control, Dolby TureHD&PLIIz, dts-HD MA, Audyssey Dynamic Volume, Dynamic EQ, DSX and MultEQ XT room acoustic calibration, HDMI to HDMI Digital Video scaling, 2nd&3rd zone audio outputs, XLR&RCA Pre outputs, Color GUI OSD, Backlit&Learning Remote with LCD, HD Radio, Sirius Ready, IP&Web Browser control capability, Audyssey Pro for Custom Installation, Flasher Input, Marantz Remote Control In/Out terminals, DC trigger x2, RS-232C, Detachable Power code
  • Ver.1.4 3D ready 6 HDMI inputs(including 1 front input) 2 selectable outputs
  • USB input for music playback with iPhone/iPod and USB memory
  • Bluetooth capability with option RX10
  • Network player function for music/photo streaming, Compatible with Windows7, Support UPnP, Internet Radio(v-Tuner), Online streaming service available: napster, PANDORA, Rhapsody and flickr, iPhone/iPod Touch Apps Control
  • Audyssey Dynamic Volume, Dyamic EQ, DSX and MultEQ XT room accoustic calibration
  • Binding: Electronics
  • Label: Marantz
  • Color: Black
  • Model: AV7005
  • Product Group: Receiver or Amplifier
  • Warranty: Part:3y, Labor:3y

Aurora 16 (AES and analog I/O)

Lynx Aurora 16 (AES and analog I/O)



Since their introduction in 2005, the Lynx Aurora converters have provided high quality AD and DA conversion for professional audio studios around the world. All Aurora I/O functions for parameter control are controlled and monitored within Pro Tools.Aurora 16 and Aurora 8 are 16 and 8 channel 24 bit /192 kHz analog-to-digital/digital-to-analog converters in a single-space rack-mountable case. The Aurora 16-VTHD adds variable trim pots to all analog input and output channels, for fine adjustment of maximum output levels between +8.5 dBu to +24 dBu. The analog inputs and outputs are electronically balanced. The AES digital I/O is transformer coupled and is capable of driving 500 feet of cable at 192 kHz. Both dual and single wire AES channel modes are supported at sample rates up to 192 kHz.
  • Comes standard with AES digital and analog in/out (other IO cards available)
  • Aurora 16: Simultaneous 16 channel analog I/O and 16 channel AES/EBU I/O
  • 24 Bit / 192 kHz mastering quality A/D and D/A conversion
  • 192 kHz AES/EBU I/O supporting single and dual wire modes
  • Single rack space configuration, no fan
  • Binding: Electronics
  • Label: Lynx Studio Technologies
  • Model: Aurora 16
  • Product Group: Receiver or Amplifier

Friday, September 13, 2013

Stereo Pre Amplifier

Adcom GFP-715 Stereo Pre Amplifier



ADCOM GFP-715 Stereo Pre Amplifier
  • 4 High Level Inputs
  • Class A Circuitry
  • Bass, Treble, Balance
  • Includes Remote
  • Binding: Electronics
  • Label: Adcom
  • Model: GFP-715
  • Product Group: Receiver or Amplifier
  • Warranty: FIVE YEARS

Thursday, September 12, 2013

STM-LDA3 Mic Preamplifier Studio Quality with Phantom Three Distributed Line Level Outputs - Power Supply Included

RDL STM-LDA3 Mic Preamplifier Studio Quality with Phantom Three Distributed Line Level Outputs - Power Supply Included



The STMLDA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 k balanced input accepts a wide variety of microphone input levels without loading professional lowimpedance microphones. A multiturn gain trimmer allows precise output level adjustment. The output signal is available on three separate balanced line level outputs. Each output may be connected balanced or unbalanced. RDLs exclusive lownoise discrete preamplifier circuitry produces studioquality lownoise performance in an economical preamplifier. Dynamic or condenser microphones may be used with the STMLDA3. Standard 24V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDLs unique dualLED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below a 4 dBu output. The intensity of the green LED progresses from minimum to full intensity at 4 dBu. The adjacent red LED illuminates when the operating level exceeds 4. This makes the STMLDA3 easy to set up without any external test equipment, and operating levels may be monitored at the module. - Power Supply Included
  • Studio Quality Microphone Preamplification.
  • Studio Quality Mic Preamp with 3 Distributed LineLevel Outputs.
  • LowNoise and LowDistortion Performance.
  • Selectable Filtered Phantom Voltage.
  • Adjustable Gain up to 60 dB.
  • Binding: Electronics
  • Label: RDL
  • Model: STM-LDA3
  • Product Group: Photography

Wednesday, September 11, 2013

DACport LX Ultra Low-noise, portable USB DAC

CEntrance DACport LX Ultra Low-noise, portable USB DAC



DACport LX gives you an Ultra Low-noise, portable USB DAC, over 40 kHz audio bandwidth, 0.0018% THD, and true USB plug and play. No batteries are required. Most importantly, you can listen to true 24/96 HD content without the need to install any custom drivers - all these benefits are courtesy of CEntrance exclusive USB technology.
  • Audiophile-grade line-level USB DAC
  • Plays 24-bit/96 kHz HD music
  • No drivers needed, plug and play with most laptops, nettops, and music servers.
  • No power adapter, DACport LX uses USB power
  • Audio Output: Stereo 1/4" headphone jack
  • Binding: Electronics
  • Label: CEntrance
  • Model: DACport LX CE1804LX
  • Product Group: Receiver or Amplifier

Audible Ringer

Valcom Audible Ringer



- Valcom CO audible ringer- 90 Vac ring or dry contact closure activation- Connects to analog PBX station port- Provides ringing over paging speakers- Provides 3 seperate zone outputs and volume controls- For use with one-way
  • Sold Individually
  • Binding: Electronics
  • Label: VALCOM
  • Department: Valcom Accessories
  • Model: VC-V-9924C
  • Product Group: CE

Tuesday, September 10, 2013

Stereo 96 ADC

Mytek Stereo 96 ADC



The MYTEK Stereo96 series consists of two 1/3 rack units- the Stereo96 ADC and the Stereo 96 DAC. They are also a part of extended family of 1/3 rack units which also includes 192kHz capable converters, SRC and Studio Clock. Stereo96 converters can be used as stand-alone devices for variety of studio applications such as mastering, recording and playback, whenever the highest quality conversion is required. Users choose Mytek 8X96 converters primarily for their outstanding sound quality. The sound of Mytek converters can be described as "transparent". We design our converters to be as faithful to the signal as possible, rather than follow philosophy of some other manufacturers who offer "analog" or "tube" sounding converters. Mytek converters are closest to a straight wire, which is especially evident when used at full 24/96 resolution. Sonically they are equal or better than the most expensive mastering converters. Even when used in 16 bit mode, the Stereo96 converters produce 20dB (10 times) less distortion than typical converters found in budget recording equipment. On Mytek website you can find and download various sound samples to evaluate Stereo96 series sound quality and compare it to the sound of other high end converter units.
  • 44.1, 48, 88.2 and 96kHz internal sampling frequencies
  • Ext. wordclock sync 25-100kHz or 256x Superclock(tm
  • High performance SuperShaper-HRTM psychoacoustic noiseshaping algorithm for 16 bit output
  • Switchable precision 10 turn-trimpots or input gain knob
  • Wordclock output can be used as a hi-end house clock.
  • Binding: Electronics
  • Label: Mytek Digital
  • Model: Stereo 96 ADC
  • Product Group: Receiver or Amplifier

Integrated Amplifier (Black)

Teac AI-3000-B Integrated Amplifier (Black)



TEAC's AI-3000 is the flagship product of TEAC's exclusive Distinction series of integrated amplifiers. It uses true discrete analog circuits and multiple analog inputs for versatile audio system planning. A high-quality sculpted aluminum front panel and volume knob exudes quality, and the interior is filled with electronic components of equal caliber. The AI-3000 drives a mammoth 360W per channel, enough for speakers of any size, with an impressive signal to noise ratio of 102dB. The aluminum side panels are heat sinks that run the entire length of the amplifier. Two fully-balanced audio inputs are available for high-end components. The five switchable unbalanced sources also include a phono preamp input. At over 9" high and 69 pounds, the AI-3000's imposing looks match the amplifier's muscular audio performance. Built with a focus on quality over price, the AI-3000 is the ideal center for an impressive listening system. The AI-3000 is available in black or silver. TEAC's Distinction series is a new line of high-end products for listeners looking for exquisite sound quality from their components. Engineers from Esoteric, our exclusive audiophile brand, were involved in the voicing phase of their product development.
  • Authentic Discrete Analogue Amplifier Circuit
  • 2 Balanced Analogue Audio Inputs - 5 Audio Inputs (Phono, CD, Tuner, AUX, Tone-Direct) A/B Speaker Outputs
  • Output Power: 360W + 360W (4 ohms) - 200W + 200W (8 ohms)
  • Speaker Terminals: x 2 pair (Binding Post)
  • Dimensions (W x H x D): 17-1/8" x 20-1/2" x 9" (435 x 230 x 520 mm)
  • Binding: Electronics
  • Label: Teac
  • Color: Black
  • Model: AI-3000-B
  • Product Group: Receiver or Amplifier

Monday, September 9, 2013

Page Port PreAmp / Expander By

Page Port PreAmp / Expander By VALCOM



- Page port pre-amp / expander- Pre-amplifies low level audio to remote sites- Provides virtually unlimitedexpansion for any system (150 Valcom one-way speakers per VC-V-1094)- Master volume control for entire system or groups of remote speakers- Isolates
  • Page port pre-amp / expander.
  • Pre-amplifies low level audio to remote sites.
  • Provides virtually unlimitedexpansion for any system (150 Valcom one-way speakers per VC-V-1094).
  • Master volume control for entire system or groups of remote speakers.
  • Isolates page port from speaker lines.
  • Binding: Electronics
  • Label: Valcom
  • Model: VC-V-1094A
  • Product Group: CE

Classic 2100 Stereo Preamp

Parasound - Classic 2100 Stereo Preamp



Parasound's NewClassic Model 2100 is a versatile two-channel preamplifier that's equally expert with venerable and modern technology, from vinyl to MP3. A low-noise phono input provides the correct gain and load for both MM and MC cartridges. The Model 2100 also enables you to upgrade your present surround sound system for serious two-channel, audiophile-quality listening. Left, right, and sub bypass jacks make it simple to use the Model 2100 and your surround sound receiver in the same system, even if your system has a subwoofer and small left and right speakers. This great feature lets you keep the 2100 directly in the signal chain and play either stereo or surround sound without messing with wires. Automatic pass-through is activated as soon as you turn off the 2100. And bypass input can be selected via remote. Built-in subwoofer control is another key feature. Parasound really thought of it all with the Model 2100. An adjustable subwoofer crossover provides analog bass management for your stereo sources, and you can adjust the subwoofer level on the front panel. Also included are separate output jacks for full range (large speakers), and 80 Hz high pass filtered (small speakers). This lets you push only frequencies about 80 Hz to your satellite speakers, without needing an expensive external crossover.
  • Two channel high end audio preamplifier
  • 7 pairs of line level inputs
  • 1 input pair can be switched for MM or MC phono cartridge with correct input impedance
  • Can add to an existing surround system to upgrade analog two-channel sound
  • Parasound 3 year parts, 3 years labor warranty
  • Binding: Electronics
  • Label: Parasound
  • Model: 2100
  • Product Group: CE

Sunday, September 8, 2013

Page Control - 1 Zone 1Way (VC-V-2000A)

Page Control - 1 Zone 1Way (VC-V-2000A) -



1 Zone one-way page controlBackground music input with voice operated mutePage override for special priority announcementsBattery back-up input Built-in power UL listedAccess: page port, PBX loop-start trunk port, electronic or 1A2 line key (line card required), or dedicated singleline phone setInput impedance: 600 ohmMusic source impedance: 4 to 600 ohmMusic input level: -10dBm nominalDC output: -24 Vdc at 600 mAPower requirements: 120 Vac/1AVALCOM POWER UNITS (12)VCV2000A
  • 84
  • Binding: Electronics
  • Label: Valcom
  • Model: VC-V-2000A
  • Product Group: CE

Audio - JD5T - Remote Control Unit with Tube Preamplifier in Silver

Jolida Audio - JD5T - Remote Control Unit with Tube Preamplifier in Silver



Customers have requested remote controls for the older manual amplifiers or other manual amplifiers. What to do? Jolida built a control box. Not only can you control the volume of the amp, but the JD5T can be used as a preamplifier with 10db of gain, There is remote on/off, mute, and standby, plus two AC receptacles, and two outputs which now make hooking to a subwoofer or bi-amping an easy procedure.
  • Multiple Inputs: Tuner, DVD, CD and Aux. (for Tuner, TV, VCR, DVD or Computer).
  • Remote Control has four functions: Standby, V+,V-, and Mute.
  • Two RCA Outputs
  • Two AC output receptacles that will be cut off when standby.
  • State of the Art Components: High quality audio potentiometer, gold plated RCA input jacks.
  • Binding: Electronics
  • Label: Jolida
  • Model: JD5T
  • Product Group: Receiver or Amplifier

Saturday, September 7, 2013

NANO - Phonostage

Clearaudio - NANO - Phonostage



The Clearaudio Nano phono stage provides real high-end performance at a true budget price. Clearaudio has achieved this breakthrough by using a simple, elegant and astonishingly effective design perspective. "The Nano is a fantastic value; offering great versatility in a tiny package for a tiny price," notes Sixmoons.com for October 2008. The printed circuit board is embedded within a massive precision CNC-machined aluminum block that forms a resonance-free chassis. The miniature size of the Nano ensures outstanding technical results and unheard of quietness within its price range. And it offers continuously variable gain from 34 dB to 67 dB. The latest sophisticated surface-mount technology is used in conjunction with precision electronic components, such as Burr-Brown (Texas Instruments) integrated circuits, and extremely short signal paths leading to a pure, hum and noise-free music reproduction. The true dual-mono design features separate left and right switches for input loading, gain control and MM / MC selection, extracting the best results from virtually any cartridge.
  • Compact MM / MC phono stage
  • Separate left and right switches for input loading, gain control and MM / MC selection
  • Sophisticated surface-mount technology
  • Burr-Brown (Texas Instruments) integrated circuits
  • True dual-mono design
  • Binding: Electronics
  • Label: Clearaudio
  • UPC: 815414010435
  • Product Group: CE

Friday, September 6, 2013

PYLE-PRO Ultra Compact Phono Turntable Preamp

PYLE-PRO PP444 Ultra Compact Phono Turntable Preamp



This Pyle Pro preamp is perfect for bringing a turntable's phono-level output to line-level output for your receiver or amplifier. The ultra low-noise audio operational amplifier offers outstanding sound performance. Includes a 12 V DC adaptor for operation. Also outputs over stereo 1/4 " jack.
  • Converts Your Phono Signal to a Line Level Signal State-of-the-art Phono Preamp To Accommodate Magnetic Pickups - Input Sensitivity: 3mV at 50K Ohms (phono) - Dimensions: (W)3.54"x (H)2.13" x (D)1.02" - Weight: 0.88 Lbs
  • Ultra Low-Noise Audio Operational Amplifiers Offer Outstanding Sound Performance - Output: 2V max (P-P) at 10K Ohms - Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms - T.H.D: 0.08 for 1 KHz 3 MV Input - Output Level: 2V
  • Dedicated RCA and 1/4' Output Connectors - Includes power adapter 12V DC - Load Impedance: 10K Ohms - Reference Voltage: 1V d
  • DC 12-Volt Adapter Included - THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB | Frequency Response: 20Hz To 20KHz @ 2dB - S/N Ratio (A-WTD): 70 dB - Frequency Response: 20 Hz ~ 20 KHz +/-2dB
  • Connects to Turntable - Connects to Turntable Output to Bring Phono Level Up to Line Level - 12V DC 110V Adaptor Included
  • Binding: Electronics
  • Format: CD-ROM
  • Model: PP444
  • Product Group: Musical Instruments
  • Release Date: 2012-05-19
  • Warranty: 3 Year limited Warranty

Audio - Phono Box DC - MM/MC Phono preamp with line output - Silver

Pro-Ject Audio - Phono Box DC - MM/MC Phono preamp with line output - Silver



The Pro-Ject Phono Box DC is a flexible phono stage for interfacing a turntable to a preamplifier, integrated amplifier or receiver that provides only line-level inputs. Low noise, lose distortion and a flat RIAA equalization curve with 60dB of gain (MC), 40 dB gain (MM) deliver high fidelity performance for both moving magnet and moving coil cartridges. The Phono Box DC is capable of a maximum output of 9.5V RMS / 1 khz.
  • Input Impedence MM:47k ohms / 120pf, Input Impedence MC: 100 ohms / 120pF
  • Gain MM: 40dB / Gain MC:60 dB
  • Noise MM:86 dB/ Noise MC: 68 dB
  • THD: MM 0.01% / THD: MC 0.05%
  • RIAA EQ Curve Accuracy:20 Hz - 20 kHz / max 0.5 dB
  • Binding: Electronics
  • Label: Pro-Ject
  • Color: Silver
  • Model: PHONO BOX II
  • Product Group: CE

Thursday, September 5, 2013

P2001at 2000w 19 Professional Mybrid Preamplifier W/ Am/fm Tuner

Pyle P2001at 2000w 19 Professional Mybrid Preamplifier W/ Am/fm Tuner



Description:

  • Professional Hybrid Receiver & DJ Pre-Amplifier
  • RMS Power Rating:
    • 8 ohm: 200 watts
    • 4 ohms: 360 watts
    • 2 ohms: 450 watts
  • Max power output: 1000 Watts
  • Inputs: RCA (2 audio sources)
  • Outputs: Banana binding post (to speakers)
  • 1 RCA dedicated for record line output
  • 2 mono RCA dedicated for subwoofer output
  • 1 RCA dedicated for preamp output
  • Powers 4 loudspeakers
  • Separate gain control for preamp and subwoofer
  • Ipod docking station
  • iPod / MP3 input with cable
  • 110-220V Switchable
  • Digital fluorescent output display meter
  • AM/FM Quartz synthesized tuner
  • Auto Station Seek
  • Weight: 14.3 lbs (6.5 kg)
  • Dimensions: 13"D x 19"W x 3-1/16"H
  • 1-year Manufacturer's warranty

  • NEW - Retail
  • 1-Year Warranty
  • pyle p2001at
  • Pyle P2001at 2000w 19 Professional Mybrid Preamplifier W/ Am/fm Tuner
  • Label: Pyle
  • Model: p2001at
  • Product Group: Single Detail Page Misc