Saturday, August 31, 2013

7.1 Channel Surround Processor

JBL AV1 7.1 Channel Surround Processor



First MSRP$5,000.00Analog Audio InputsEight stereo (RCA) or five stereo and one 5.1-channel or two stereo and two 5.1-channel connectorsDigital Audio InputsFour S/P-DIF coaxial (RCA) and four S/P-DIF optical (TosLink) connectors; coaxial and optical input connectors conform to IEC-958, S/P-DIF standards; accepts 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates; accepts 16-24 bits PCM audio, Dolby Digital, DTS and DTS-ES discrete data formatsAudio Output(s)Eight unbalanced (RCA) connectors for front L/R, center, subwoofer, side L/R and rear L/RAudio Processing SectionA/D Conversion24-Bit, 96kHz, dual-bit architectureD/A Conversion24-Bit, 44.1kHz to 192kHz, multi-bit architectureFrequency Response10Hz to 20kHz, +0.05dB/-0.1dB, -0.5dB at 40kHz, reference 1kHzTHD + NoiseBelow 0.008% at 1kHz, maximum output levelDynamic Range108dB minimum, 22kHz bandwidthS/N Ratio108dB minimum, 22kHz bandwidthInput Sensitivity200mV RMS (2V RMS for maximum output level) at 0dB input gainOutput Level150mV RMS typical, 6Vrms maximum; maximum value with full-scale input signal and volume at +12dBVideo Input & Output ConnectorsVideo InputsFive composite (RCA), five S-video and three component video (RCA)Video OutputsOne composite (RCA), one S-video and one component (RCA)Composite & S-video PerformanceCompatibilityNTSC, PAL and SECAMImpedance75 OhmsBandwidth>25MHzComponent Video PerformanceCompatibility3-Channel (Y/Pr/Pb), format-independentImpedance75 OhmsInsertion Loss<3dBBandwidth>150MHzGeneralTrigger OutputsOne power on/off and one programmable connector on 5-pin DINRS-232 Serial Input/OutputTwo 9-pin D-sub connectorsPower Requirements90 - 250 VAC, 50Hz - 60Hz, 60W (universal line input), detachable power cordRack MountingOptional brackets are available for installation in a standard 19" equipment rack (two rack units required for AV1).Dimensions (H x W x D)3-13/16" x 17-5/16" x 14-7/8"Weight17 lb/7.7kg
  • 7.1 Channels, 22kHz Bandwidth, 108db
  • less than .006 thd
  • Binding: Electronics
  • Label: JBL
  • Model: AV1
  • Product Group: CE

High Sensitive Preamp Mini Audio Pickup Tiny Spy Microphone with Power Bypass for Security Audio Sound Voice Monitoring Recording and bonus Warning Decal WD4

VideoSecu High Sensitive Preamp Mini Audio Pickup Tiny Spy Microphone with Power Bypass for Security Audio Sound Voice Monitoring Recording and bonus Warning Decal WD4



This high gain mini preamp microphone is the best for CCTV professionals. Line level out put: 6-15 VDC. Power in and Power out design allows the microphone to share the same power source with the camera. bonus warning decal is included. Notice: This item is VideoSecu brand. Please report to .com if you received one without VideoSecu logo.
  • Collect audio evidence as important as capturing video evidence
  • Preamplifier used to increase a microphone's low output voltage to a stronger usable level
  • Built in on board IC preamp, low noise, high gain and auto level adjustment
  • Pick up every sound with this super high gain micro audio system. bonus warning sticker is included.
  • 1 ft cable attached with a RCA connector for audio and a power plug of 2.1mm center positive
  • Binding: Electronics
  • Label: VideoSecu
  • Model: MIC03D
  • Product Group: CE

Switchable Moving Magnet/Coil Phono Preamp, Pre-amp (Preamplifier)

TCC TC-760 Switchable Moving Magnet/Coil Phono Preamp, Pre-amp (Preamplifier)



The TC-760's similar MM specs and sound quality rival those of our TC-750, but this model adds the ability to connect moving coil cartridges. Whether you own an MC cartridge now or envision upgrading to one in the future, this preamp gives you the flexiblity to connect both MM and MC cartridge-equipped turntables at the same time, selecting between them with the flick of a switch. Now includes our improved REGULATED AC power supply usable worldwide!
  • 12 volt DC operation; will work anywhere in the world.
  • RIAA freq response 20hz-20,000hz +/- 0.5dB, MM S/N ratio 75dB.
  • Gold plated jacks and black anodized metal casing.
  • Ground wire terminal, power switch and indicator.
  • Includes AC adaptor, RCA cable and miniplug adaptor.
  • Binding: Electronics
  • Label: TCC
  • Color: black
  • Model: TC-760
  • Product Group: CE

Friday, August 30, 2013

1500W HYBRID AMPLIFIER w/ AM/FM TUNER

1500W HYBRID AMPLIFIER w/ AM/FM TUNER



Technical Pro changes the face of amplifier technology with the introduction of HYBRID, a technological advance that makes bulky and inefficient amplifiers a thing of the past. Technical Pro started with the same revolutionary technology found in our power amplifiers, and incorporated a pre-amp, Tuner and a dual Karaoke MIC mixer. With high power output, versatile loading options, high thermal capacity and reliability, the HYBRID series brings you all of what Technical Pro stands for - incredible performance and sound, versatility, and the ultimate in reliability under harsh conditions. This receiver also features an iPod or MP3 connection built right on the face of the Receiver so you can crank your favorite iTunes through your home stereo system! With its newest feature, a USB and SD Card Input right on the face, with Record Feature, the Hybrid makes it even easier to enjoy your music. Features: 2 x 70 Watts per Channel 1500 watts peak power 7.2 Channel up conversion Inputs: RCA (2CH input, 5.1 CH input), USB and SD Card, iPod / MP3 Outputs: Banana binding post (4 full range speakers), Push button (surround sound speakers), 2 RCA (Record line, Pre-amp output), 2 Mono RCA (Subwoofer) Separate gain controls for Pre-amplifier and subwoofer outputs AM / FM Digital tuner Dual Microphone inputs (1/4") Microphone volume, bass, Treble and echo controls Digital fluorescent output display Removable rack-mount brackets Dimensions: 19" x 3.5" x 13" (WxHxD) 110-220V Switchable
  • Binding: Electronics
  • Label: TECHNICAL PRO
  • Model: 2766
  • Product Group: CE
  • Warranty: 30 Days After Receipt

Thursday, August 29, 2013

Zpre2 Audio/Video Preamplifier

Parasound - Zpre2 Audio/Video Preamplifier



Parasound's upgraded Zpre2 version of its hugely popular Zpre isn't just a tweak, it's a genuine breakthrough. Despite its small size, and despite its low cost, the Zpre is quite simply one of the best Parasound preamplifiers ever made. And that's saying a lot, considering Parasound's reputation for first class audiophile components. The Zpre2 redesign adds even more capability to this compact preamplifier. Zpre2 occupies only half the horizontal space of standard stereo components. But it delivers full-scale audio performance. Use it in small bedroom or office hi-fi systems or even for MP3 playback. A priority input feature makes the Parasound ideal for multi-room or multi-zone systems, too. The Zpre2's upgrades over the original Zpre facilitate multi-room operation. The improvements start with a two-way RS-232 connection for feedback of key functions. A new auto turn-on by 12-volt trigger locks out the front panel power button, keeping the on-off status in sequence with your other components during IR control. Revised circuitry and layout deliver better overall performance, and an improved auto select priority switching for Input 1 enhances operation and adds a colored status indicator. A 115-volt-230-volt selector switch on the chassis bottom had been added, too. The Zpre2's high-current power supply and low noise circuit deliver ultra-clean audio signals to your amplifier. Full remote control with a high-quality motorized volume control add to the convenience of the Zpre2's compact 'tuck-in' size. And, of course, it's the perfect partner to Parasound's matching Zamp compact amplifier. Four audio inputs and four-source video switching give the Parasound plenty of hook-up flexibility. A priority input connection can be programmed to automatically override other audio video inputs for use in a multi-room or multi-zone system.
  • Automatic input priority switching
  • Four-source video switching
  • Fully remote controllable
  • High-current power supply
  • Bass and treble controls
  • Binding: Electronics
  • Label: Parasound
  • Model: Zpre2
  • Product Group: CE

M1 SDAC Preamplifier/Digital-to-Analog Converter (Silver)

Musical Fidelity M1 SDAC Preamplifier/Digital-to-Analog Converter (Silver)



The M1 SDAC is the ideal Preamplifier/Digital-to-Analog Converter for the modern music lover.

Design and connections
The M1 SDAC is utilizes a 32-bit DAC and sample-converter of exceptional quality. This circuitry offers conversion at sample rates up to and including 192 kHz, meaning it can accept the very best high-resolution music files available today. The fully asynchronous USB input is designed to deliver exceptional quality at all sample rates and from all file types. It's compatible with computers running Windows, Mac OS X or Linux.

The Bluetooth wireless input deliver high-performance sound from mobile devices and uses the aptX system for stunning audio quality over the entire audio band. It accepts up to 24bit/48kHz files, which are upsampled to 24/192. It's also backwards compatible with previous Bluetooth versions, so you'll be able to use a wide range of portable and computer sources. A USB input lets you easily connect your computer or hard-drive, and two analog inputs with RCA connectors make the M1 SDAC equally at home with more traditional sources.

Other digital connections include SPDIF Coax or Toslink Optical cables or, for ultimate performance, AES/EBU digital audio with XLR (balanced) connectors. Both the SPDIF Coax and AES/EBU inputs are capable of accepting high-resolution 24bit/192kHz digital data. The digital coaxial, balanced and USB inputs all accept music files up to 24/192, while all the digital inputs are internally upsampled to 24-bit/192kHz. There's a coaxial and an optical output, too, plus an analog-to-digital converter within the DAC section, allowing a digital output for any input.

A headphone amp module, full infrared remote control and 12v trigger connections round out the convenient features of this well-thought-out component.

  • Clean, ultra-low distortion preamplifier
  • 24bit/192kHz Digital-to-Analog Converter/Analog-to-Digital Converter
  • Balanced and unbalanced inputs and outputs
  • USB and Bluetooth inputs
  • Two analog inputs
  • Binding: Electronics
  • Label: Musical Fidelity
  • Color: Silver
  • Model: M1 SDAC Silver
  • Product Group: Receiver or Amplifier

Wednesday, August 28, 2013

K4102 GUITAR HEADPHONE AND PREAMPLIFIER KIT

VELLEMAN K4102 GUITAR HEADPHONE AND PREAMPLIFIER KIT



VELLEMAN K4102 GUITAR HEADPHONE AND PREAMPLIFIER KIT. An electric guitar cannot be connected to just any amplifier or audio installation. This pre-amplifier has been designed for this purpose and provides you with a headphone output, allowing you to practice without disturbing others. Moreover, it is fitted with a special device for tone adjustment, allowing anyone to create their personal sound.
  • sound adjustment
  • adjustable input sensitivity
  • low noise
  • headphones output: max. 2 x 50mW / 32ohm
  • housing included
  • power supply: 9V battery (not incl.)
  • dimensions: 2.8 x 1.2 x 4.1"
  • THIS IS AN ELECTRONIC KIT AND REQUIRES ASSEMBLY
  • Label: VELLEMAN
  • UPC: 836479009592
  • Product Group: Single Detail Page Misc

Tuesday, August 27, 2013

Replacement OEM PWB-PREAMP 934D112002

Replacement Mitsubishi OEM PWB-PREAMP 934D112002



New Original OEM Mitsubishi PWB-PREAMP 934D112002
  • New OEM Original Part
  • Brand new original replacement part.
  • Binding: Electronics
  • Label: MITSUBISHI
  • Model: 934D112002
  • Product Group: CE

AV8801 Surround Sound Preamplifier / MM8077 7-Channel Power Amplifier Bundle

Marantz AV8801 Surround Sound Preamplifier / MM8077 7-Channel Power Amplifier Bundle



The AV8801 pre-amp processor offers processing for lossless formats such as Dolby TrueHD and DTS HD Master Audio as well as surround sound decoding for up to 11.2 channels. A slew of Audyssey technologies, including MultEQ XT32 acoustic room adjustment, will dramatically improve your listening experience. And full networking capabilities, including a 4-port Ethernet switch, provide for network streaming functions such as Pandora and SiriusXM internet radio as well as Spotify, along with the ability to stream music and photos over the home network.

The MM8077 is a 7-channel amplifier that cranks out 150W per channel of pure, clean power to give your system the muscle it needs to perform at its fullest. It includes both unbalanced (RCA) and balanced (XLR) inputs as well as gold-plated speaker binding posts for the best connections possible.

  • Marantz AV8801 11.2-Channel A/V Pre-amp/Processor
  • Marantz MM8077 7-Channel Power Amplifier (150W per channel)
  • Bundle is $1,000 off the regular, separately purchased retail price
  • Binding: Electronics
  • Label: Marantz
  • Model: AV8801-MM8077
  • Product Group: Receiver or Amplifier

Monday, August 26, 2013

Communication Controller - Black

Elan Z600 Communication Controller - Black



Add whole-house telecommunications to any S12, S6, Z.630 or stand-alone system! ELAN was the pioneer in the integration of standard touch-tone telephones into distributed audio systems, and the Z.600 Comm Controller is the culmination of years of experience in this arena. The concept is simple. Instead of walking up to a box mounted on the wall, all you need to do is pick up any telephone to communicate throughout the home. Easy-to-remember key presses initiate features such as Whole-House Paging, Phone-to-Phone Intercom, Two-Way Door Station Communications and Caller-On-Hold. Pages are heard over the same speakers that were installed for music distribution. If a caller is on hold, the Music-On-Hold feature will keep them entertained. Additional features let you control door/gate latches and activate relay-controlled devices such as lighting and garage door openers from any touch-tone phone. Add up to two ELAN door stations and get digital door chimes broadcast throughout the home. And the Z.600 isn't just for use with ELAN systems-it's a stand-alone component that integrates into any receiver-based system in lieu of an old-fashioned intercom!
  • Important Note: Elan Products Must Be Professionally Installed
  • Whole-house paging and music mute
  • Phone-to-phone intercom
  • Music-on-hold
  • Caller on-hold
  • Binding: Electronics
  • Label: Elan
  • Model: Z600
  • Product Group: Receiver or Amplifier

Page Control - 1 Zone 1Way Enhanced

Page Control - 1 Zone 1Way Enhanced



1 Zone oneway page control enhanced Enhanced: Phantom zone allows paging to all speakers but limits music to selected speakers Builtin single and warble tone generator Background music input with voice operated mute Page override for special priority announcements Battery backup input Builtin power UL listed Access: page port, PBX loopstart trunk port, electronic or 1A2 line key (line card required), or dedicated single line phone set Input impedance: 600 ohm Music source impedance: 4 to 600 ohm Music input level: 10dBm nominal DC output: 24 Vdc @ 1A Power requirements: 230 Vac/.5AWeight: 5.3lbs Dimensions: 7.01H x 9W x 2.4D VALCOM POWER UNITS (+20)VCV2001A
  • Binding: Electronics
  • Label: VALCOM
  • Model: VC-V-2001A
  • Product Group: CE
  • Warranty: 30 DAYS

Sunday, August 25, 2013

Page Control - 1 Zone 1Way

Page Control - 1 Zone 1Way



Page Control - 1 Zone 1Way

- 1 Zone one-way page control- Background music input with voice operated mute- Page override for special priority announcements- Battery back-up input - Built-in power - UL listed- Access: page port, PBX loop-start trunk port, electronic or 1A2 line key

  • Binding: Electronics
  • Label: Valcom
  • UPC: 799111008936
  • Product Group: CE

Saturday, August 24, 2013

Vacuum-Tube Line Stage Preamplifier

conrad-johnson Classic Vacuum-Tube Line Stage Preamplifier



For more than thirty years, conrad-johnson has refined the concept of high end audio through its relentless pursuit of excellence. The conrad-johnson Classic vacuum-tube preamplifier honors this thirty-year heritage of musically accurate preamplifiers. The Classic faithfully reproduces the harmonic structure of complex musical passages, preserving the distinctive tonal character of each instrument and voice. The space of the sound stage and the ambience of the concert hall are conveyed in realistic, three dimensional perspective. Musical transients are reproduced naturally, with realistic impact, but without the artificial enhancement which characterizes so many "hi-fi" components. Never imposing its own distractions, the Classic invites the listener to enjoy the musical performance. The Classic preamplifier is a zero-feedback circuit. It has a single triode amplifi-er direct coupled to a high-current output stage. This minimizes the output impedance, making the Classic compatible with nearly all installations, including those requiring long lengths of interconnect cable. DC plate voltages are supplied by a very low impedance discrete regulator, designed to prevent the power supply from imposing its own colorations on the audio signal. A regulated filament supply further isolates the unit from ac line voltage fluctuations. Premium quality component parts are specified for the Classic to assure full realization of the potential performance of the circuit designs and to dependably sustain that performance for years to come. Precision, metal-film resistors yield low noise performance for greatest clarity. Polypropylene and polystyrene capacitors, used exclusively in both the audio circuits and the regulated plate voltage supplies, offer maximum temporal accuracy. Phono equalization in the Classic is accomplished with 1% tolerance precision parts to assure tonal neutrality. Industrial quality controls offer extended life and maintain a crisp, precise feel.
  • Gain: 22 dB. Maximum Output: 9.5 VRMS.
  • Distortion: less than .15% THD. Bandpass: 2 Hz to more than 100 KHz.
  • Hum and Noise: -98 dB relative to 2.5 V output.
  • Tube Complement: 2 x M8080. Dimensions: 13.625D x 19W x 3.625H inches. Weight: 14 lb net.
  • Made-in-U.S.A.
  • Binding: Electronics
  • Label: conrad-johnson
  • Model: Classic
  • Product Group: Receiver or Amplifier

Page Control - 1 Zone 1Way Enhanced (Catalog Category: Installation Equipment / Accessories)

Page Control - 1 Zone 1Way Enhanced (Catalog Category: Installation Equipment / Valcom Accessories)



Page Control - 1 Zone 1Way Enhanced (Catalog Category: Installation Equipment / Valcom Accessories)
- 1 Zone one-way page control enhanced
- Enhanced: Phantom zone allows paging to all speakers but limits music to selected speakers
- Built-in single and warble tone generator
- Background music input with voice operated mute
- Page override f
  • Binding: Electronics
  • Label: VALCOM
  • Model: ITE-VC-V-2001A-TLD|1
  • Product Group: CE

Friday, August 23, 2013

Pre Box DS - Stereo Line Pre-Amplifier - Silver

Pro-Ject Audio - Pre Box DS - Stereo Line Pre-Amplifier - Silver



Audiophile preamplifier with 4 line inputs! The heart of the Pre Box DS is a pure single-ended Class-A Outputstage-Design, a real High-End solution. The highly shielded metal chassis effectively rejects any vibration and electromagnetic noise. 12-volts Trigger switching is provided so other components connected can be power activated with the Pre Box DS. IR remote comes with Pre Box DS to switch inputs and adjust volume. Former test-darling Pre Box SE had only one weakness: very low level of hiss, when used with low-level input signals. With a new circuitry plus relais-controlled volume regulation and input selection this minor problem completely disappears with Pre Box DS. No other preamplifier ever before offered such high effort in audio technology in this price range. As a result this ultra dynamic preamplifier is an outstanding sound marvel!
  • NEW! improved circuitry with even less noise
  • NEW! Volume control through relais (64 steps, 1 dB)
  • NEW! 4 line level inputs
  • NEW! relais switching of inputs
  • 1x Pre-Out, 1x Subwoofer-Out, 1x Record-Out
  • Binding: Electronics
  • Label: Pro-Ject Audio
  • Color: Silver
  • Model: PREBDSSL
  • Product Group: Receiver or Amplifier

Korora - MM/MC Phono Amplifier - Black

Firestone Korora - MM/MC Phono Amplifier - Black



Standalone solid-state battery powered phono stage preamplifier, equipped with a built in recharge circuit and high performance Ni-MH batteries. It can be used on battery power alone (recommended), or while charging. The Korora has an extreme high S/N (close to -100db) performance when powered with the battery.Firestone Audio Engineering centre has made big efforts to get he Korora at the stage where it is now. At lonely hight, and can be compared to units that are much higer in price !
  • Binding: Electronics
  • Label: Firestone
  • Model: Korora (B)
  • Product Group: CE

Thursday, August 22, 2013

VC-V-2003AHF

VC-V-2003AHF




Page Control - 3 Zone Talkback- 3 Zone talkback page control- Provides tandem all call- Background music input, automatically mutes inzone being paged- Page override for special priority announcements- Features are programmableper zone- Built-in tone generator for night ringing, time clock tone, doorbell- Accepts pulseand tone dial- Supports up to 2 talkback speakers and 40 one-way speakers per zone- Battery backup input- UL listed- Access: page port onselected telephone systems, PBX loop start or ground-start trunk port, electronic or 1A2 line key (line card required), or dedicated single line phone set- Input impedance: 600 ohm- Music source impedance: 4 to 600 ohm- Music input level: -10dBm nominal- DC output: -24 Vdc @ 500 mA-Power requirements: 230 Vac/.5A or 120 Vac/1A-Weight: 6.25lbs- Dimensions: 7.1H x 10W x 3D- VALCOM POWER UNITS (+10)VCV2003AHF
  • Binding: Electronics
  • Label: dealz4real
  • Model: DB548803
  • Product Group: CE

Wednesday, August 21, 2013

MIC MIXER PREAMPLIFIER 3 CHANNELS KIT FA652

MIC MIXER PREAMPLIFIER 3 CHANNELS KIT FA652



The pre microphone mixer circuit consists of three microphones mixing out the same position, three positions of pre mic and music point which is available for connection of music or tone.It can be applied in singing practice or conversation.
  • - Supply voltage : 12 VDC
  • - Consumption : 5mA.max
  • - Dimension : 1.98 x 2.21 inches.
  • Binding: Electronics
  • Label: Power Ohm
  • Model: FA652
  • Product Group: Receiver or Amplifier

Page Control - 3 Zone 1Way

Page Control - 3 Zone 1Way



- 3 Zone one-way page control- Provides tandem all call- Background music input automatically mutes in zonebeing paged- Page override for special priority announcements- Features are programmable per zone- Built-in tone generator for night ringing time cl
  • Binding: Electronics
  • Label: Valcom
  • Model: TDVC-V-2003A
  • Product Group: CE

Tuesday, August 20, 2013

Barcus Berry Piezo Buffer Pre-Amplifier with EQ

Barcus Berry 3000AE Piezo Buffer Pre-Amplifier with EQ



Piezo Buffer Pre-amp with EQ. Specifically designed to work with all Barcus Berry electret mic systems.
  • Features external bass, treble and volume frequency controls to allow a wide range of adjustments. Includes a belt clip for unrestricted movement. Input (EQ Flat): Input Interface = RCA unbalanced. Input Impedance = 2.2 Meg Ohms.
  • Maximum Input level = 2.0 vrms. Output (EQ Flat, Volume Max) Interface = 1/4-Inch unbalanced. Impedance = 2K Ohms. THD = .008% @ 1kHz. Noise = -92 dBu. S/N = 100 dB. Bass = +/- 12 dB @ 50Hz.
  • Treble = +/- 12 dB @ 10 KHz. Frequency Response = 5Hz - 30 kHz (+/-1 db). Power supply source = 9 volts @ 380 microamps
  • Binding: Electronics
  • Label: KMC Music Inc
  • Model: 3000AE
  • Product Group: Musical Instruments
  • Warranty: One year

Monday, August 19, 2013

Page Control - 3 Zone 1Way

VALCOM Page Control - 3 Zone 1Way (VC-V-2003A)



- 3 Zone one-way page control- Provides tandem all call- Background music input automatically mutes in zonebeing paged- Page override for special priority announcements- Features are programmable per zone- Built-in tone generator for night ringing time clock tone doorbell- Accepts pulse and tone dial- Battery back-up input - UL listed- To interface with analog extension or Centrexline add the VC-V-9970- Access: page port on selected telephone systems PBX loop start or ground-start trunk port electronic or 1A2 line key (line card required) or dedicated single line phoneset- Input impedance: 600 ohm- Music sourceimpedance: 4 to 600 ohm- Music input level: -10dBm nominal- DC output: -24 Vdc @ 500 mA- Power requirements: 230 Vac/.5A or 120 Vac/1A- Weight: 6.25lbs- Dimensions: 7.1"H x 10"W x 3"D- VALCOM POWER UNITS (+20)VCV2003A
  • Satisfaction Ensured
  • Design is stylish and innovative.
  • Functionality that is Unbeatable.
  • Binding: Electronics
  • Label: VALCOM
  • Department: Valcom Accessories
  • Model: VC-V-2003A
  • Product Group: CE

Sunday, August 18, 2013

GO46 Firewire Audio MIDI Computer Interface

Yamaha GO46 Firewire Audio MIDI Computer Interface



Yamaha GO46 is a compact FireWire mobile audio interface that features high-quality, phantom-powered microphone preamps and world-class MIDI and audio recording software. Powered via a computer's FireWire bus, the interface allows fo Buy Yamaha GO46 Firewire Audio MIDI Computer Interface now!...
  • Binding: Personal Computers
  • Label: YAMAHA
  • Model: YAMAHAGO46
  • Product Group: PC Accessory

Azur - MM/MC Phono Preamplifier - Black

Cambridge Audio - Azur 651P - MM/MC Phono Preamplifier - Black



For true vinyl fans, a high performance phono pre-amplifier is a must-have to get the best performance from your music. Thankfully, Cambridge Audio has the perfect solution in the shape of the 651P. Adding weight, scale and detail to all your favourite music, our flagship 651P, is a thoroughly reworked and revised replacement for the legendary 640P, which picked-up dozens of awards in its day. Many of today's (and yesterday's!) audio systems, from dedicated stereo amplifiers to all-in-one systems and receivers, lack the specialist, built-in amplification (known as a 'phono preamp' or 'phono stage') required for the direct connection of turntables. Cambridge Audio's 651P phono preamplifier, allows virtually all turntables on the market to flourish by using a sophisticated electronic circuit design that has been created to accommodate the two most commonly found types of phono cartridge used with modern turntables: Moving Magnet (MM) and Moving Coil (MC). Designed to bring out the hi-fi realism inherent to vinyl's grooves, the 651P is one of our most cost-effective, performance-enhancing creations.The 651P uses advanced amplification circuitry to provide the lowest possible distortion and noise. Compatible with the audiophile's cartridge choice, Moving Coil, the 651P model also employs high-spec multi-parallel capacitors to achieve exceptional RIAA accuracy. In a further nod towards its audiophile credentials the 651P features a subsonic filter to remove the unwanted and disruptive effects of low-frequency energy. And in line with Cambridge Audio's commitment to the environment, the new 651P is fitted with a power switch to allow consumption to be zeroed when not in use.
  • Multi-parallel capacitors to achieve exceptional RIAA accuracy of only 0.3dB up to 50kHz.
  • Phono pre-amplifier with moving magnet (MM) and moving coil (MC) input stages.
  • ECO Friendly Improved Power Supply
  • Single ended "Class A" gain stages with discreet transistors
  • Defeatable subsonic filter to eliminate very low frequency 'rumble', caused by vinyl imperfections.
  • Binding: Electronics
  • Label: Cambridge Audio
  • Model: 651P
  • Product Group: CE

Saturday, August 17, 2013

Pwma2003t 2000w Hybrid Preamplifier With Am Fm Tuner & 2 Wireless Mics

Pyle Pwma2003t 2000w Hybrid Preamplifier With Am Fm Tuner & 2 Wireless Mics



Description:

The future of computer connectivity is here with mini-USB cables from Cables To Go. These fully rated universal serial bus cables provide transfer rates up to 480Mbps, depending on USB version, and easily attach to any mini-USB device. Mini USB cables are designed to connect from your USB port on Hub, PC or Mac to your USB device, including cellular phones and PDAs. Foil and braid shielding reduces EMI/RFI interference, and twisted-pair construction helps reduce cross talk thus ensuring high-speed, error-free data transfer. Meets all the UL requirements for communication cabling, and is compatible with USB 1.0, 1.1, and 2.0.

Features:

  • Connector: USB Type A Male to Type Mini B 5-pin Male (MD Type)
  • Transfer rates up to 480Mbps depending on USB version
  • Make plug and play connections with cellular phones, MP3 players, digital cameras and PDAs
  • PC and Mac compatible
  • Connect a peripheral with a 5-pin mini usb port to an USB Hub or USB port on PC/Mac
  • Compatible with USB specifications 1.0, 1.1, and 2.0

    Technical Information:

  • Product Description - USB cable - 6.6 ft
  • Type - USB cable
  • Length - 6.6 ft
  • Connector(s) - 1 x 4 pin USB Type A - female
  • Connector(s) (Other Side) - 1 x 5 pin mini-USB Type B - male
  • Compliant Standards - USB / Hi-Speed USB
  • Package Type - Retail

    • NEW - Retail
    • 1-Year Warranty
    • Pyle pwma2003t
    • Pyle Pwma2003t 2000w Hybrid Preamplifier With Am Fm Tuner & 2 Wireless Mics
    • Label: Pyle
    • Model: pwma2003t
    • Product Group: Single Detail Page Misc
  • Friday, August 16, 2013

    DYNAMIC MICROPHONE PREAMPLIFIER KIT FA647

    DYNAMIC MICROPHONE PREAMPLIFIER KIT FA647



    This microphone preamplifier circuit is exceptionally designed to use with microphone. Easy application and safe cost. It requires only 2 transistor and few R and C. This circuit can give maximum 500 mV signal power.
    • - Supply voltage : 9-12 Vdc.
    • - Consumption : 0.5 mA. max.
    • - Dimension : 1.41 x 1.76 inch.
    • Binding: Electronics
    • Label: Power Ohm
    • Model: FA647
    • Product Group: Receiver or Amplifier